Cellular 700MHz-6000MHz Signal Jammer 100 Meters GSM 3G 4G 5G Mobile Phone Jammer

Product Description:

Description for jammer:

• Body of the device must be made of lightweight rectangular metal.
• In the upper part on the outer contour of the device, there must be output connectors located on one side for connecting antennas.
• Each channel must be equipped with an individual signal strength control regulator. Adjustment regulator must be installed on the front of the device.
• On the outer contour of the device in the upper part, there should be a radiator cooling grille located along the entire upper surface of the case.
• For cooling, the design of the device must have three fans located at the bottom of the equipment. The presence of ventilation ducts on the case, in the lower part of the device.
• The design of the product must provide for both horizontal and vertical installation of the device for use.
• The device and antennas must be factory-marked with channel numbers or communication standards that indicate the jammed frequency ranges.

Specifications:

• Shielding Range:

• Jammer dimensions (excluding antennas): 380x140x50 ±10 mm
• Jammer weight: 1.7 ±0.1kg.
• Device kit weight (excluding remote antennas): 2.8 ±0.1kg
• Power supply: AC adapter - AC 110/240V - DC 27V, 10A
• Antennas: Omni, 3 dB, Height 375 mm.
• Antennas: remote, directional on a flexible wire with wall mounting. The length of the connecting cable with a connector is at least 1880 mm. The antenna housing is rectangular in shape with overall dimensions 210x180x40 ±10mm.
• Working temperature: from -5°С to +50°С
• Storage temperature: from -20°С to +60°С at humidity up to 80%
• The power of the radio signal on each channel of the device is from 4 to 8 watts.
• The total power of the jammer radio signals is not less than 76 watts.

Jammer kit:

1. Jammer - 1 pc.

2. Built in Omni antennas 

4. Mains power adapter - 1 pc.

5. Passport / User Manual in Russian language - 1 pc.

6. Packing - 1 piece